What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 18.06.2025 00:33

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
but this device (an Inductor) … impedes the rapid changes in the current.
It has been said that people with ADHD can often hyperfocus. Can that be an advantage?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
so, what happens?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
How does someone start doing urban exploration?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
One
In schematic diagrams this is the symbol for a fuse:
[image of Common-mode choke]
There are three different concepts here that are getting confused.
5 health issues that can occur due to Vitamin D deficiency - Times of India
This device then solves the entire problem.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
There are two important concepts here.
Scientists visualize key protein structures linked to immune response and inflammation - Phys.org
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
What does a fuse do?
A circuit breaker is similar, but is resettable.
the problem then depends on "how fast does the fuse operate?".
What's the most sordid activity you've ever seen or heard about at a bachelorette party?
nine
These devices are installed between the “hot” and “neutral” and protective ground.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
But it can get overloaded, and no longer works.
He then describes the function of a fuse.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
At one ohm, the resistor has a maximum of 1 watt power.
It also is a device that limits the change in current flow.
He then describes Rainy Season and Lightning.
Why do Muslims not get HIV/AIDS in spite of having 4 wives and multiple relationships?
2024–10–10[John johnson John Johnson ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
These are simplified answers to the original question, and does not change anything I wrote above.
An AC voltage/ current source, and an ac inductive load.
This is 'the assistant's answer'
So, the voltage could go up to 500 volts, and the fuse will not open up.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The third is lightning and “how it gets conducted into a home.”
[old diagram got deleted by accident]
a photo is worth a thousand words.
(Dc diagram shown, AC is similar).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
One is “what exactly is in a ‘surge protector’ ? ”
Now when you have a certain ac resistance, then a current flows in a loop.
For this case there are devices called Metal oxide varistors (MOV).
The MOV will conduct when the voltage exceeds 50% of line voltage.
What is lightning?
It seems Mohan does not understand the difference between a comment and an Answer.
Upvotes:
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
what exactly is a ‘surge’ protector?
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
The other is “what does a “fuse” do?”
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
The bolt then partially travels down the line to your home.
But… the neutral is now “floating” because of the 1 ohm resistance.
eight
2024–10–14 [Omar Gharbi Omar Gharbi ]
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Barnstars:
Here is a simplified AC power diagram.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
This one hit behind the barn.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
I post the exact comment here.
First Sentence:
Because the load is inductive, the current lags the voltage.(by a bit).
but I think this circuit , shows a few more pieces.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This is where the MOV conducts again, and dissipated the energy.
At least they know the answer if they wanted it.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Edit 2024–10.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
He then asserts :
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
A fuse is a non-resetable over current circuit protector.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.